Control System-Sub Controller DMX512 Signal Sub-control
Model No. : ZY-FK1DW
Dimension : 28.6*13.6*4.5CM
Power : 15W
Features:
ZY-FK1DW controller supports standard USITT DMX512 / 1990 protocol and extended DMX512 protocol. The load of a single output port is 170 points (standard DMX512 protocol). If DMX512 decoder chip supports expansion, it can be driven according to the number of expansion channels;
It supports the automatic addressing of lamps through the addressing line, and needs to cooperate with the driver chip with addressing function, such as DMX512AP-N/NB、UCS512、WS2821, etc;
The communication adopts network protocol, and the interface is standard RJ-45, which supports on-line control and off-line control.
1. The controller output supports standard USITT DMX512 / 1990 general protocol and extended DMX512 protocol.
2. Independent brightness control of three primary colors makes it easier and more effective to adjust white balance accurately.
3. Accurate gamma correction algorithm, more in line with the human visual sensitivity characteristics, display color more fully, rich, make the designer animation or video effect perfect embodiment.
4. The maximum frame changing frequency is 120 to meet the requirements of high definition display and 3D display.
5. Using Ethernet interface and UDP network protocol, the transmission is stable, and the maximum transmission distance is 100 meters.
6. The LCD display module displays the parameters and status of the controller in time.
7. Dual network interface can realize cascade between controllers, automatic detection of controllers and visual display of connection status by software.
8. Eight port output, unlimited number of single port load points, self-test by the customer according to the characteristics of the chip.
9. Support dual backup, a bad controller or broken network cable display will not be affected.
10. Thousand / hundred trillion self-adaptive or mandatory hundred trillion can be set to ensure that the project of large points is more stable.
